6-4] Second Dial Tone - Panasonic KX-TDA50 Pc Programming Manual

8.4 [6-4] Second Dial Tone

8.4 [6-4] Second Dial Tone
A programmed Pause time can be inserted automatically between the Second Dial Tone Waiting code and
the following digits. When a programmed Second Dial Tone Waiting code is dialed after seizing a CO line, a
preprogrammed number of pauses are inserted after the code.
A maximum of 100 Second Dial Tone Waiting codes can be programmed. 20 codes are displayed at a time.
To display other sets of codes, click the applicable tab.
Second Dial Tone Waiting Code
Specifies the Second Dial Tone Waiting code.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
8.4 [6-4] Second Dial Tone
Programming Manual References
None
Feature Manual References
13.1.4 Pause Insertion
Pause Repeating Counter
Specifies the number of pauses to be inserted when waiting for the second dial tone.
Default
1
Value Range
0–20
Maintenance Console Location
8.4 [6-4] Second Dial Tone
Programming Manual References
None
Feature Manual References
13.1.4 Pause Insertion
692 PC Programming Manual Document Version 2010-11