Using the Phonebook
Checking the Line Status
You can check the status of each line (up to 6 lines) on the main LCD.
Checking the Line Status
[In standby mode]
1.
Menu
2. [D]/[C]: "Line Status" a
3. [D]/[C]: Select the line whose status you want to check. a
4. Press
/[CANCEL] to end checking the line status or press
See "Line status indication" below for details.
[During a conversation]
1.
Line
2. [D]/[C]: Select the line whose status you want to check. a
3. Press
/[CANCEL] to end checking the line status or press
See "Line status indication" below for details.
Note
R When a function key is assigned as a Line Status key, you can press that function key to display the
line status screen.
Line status indication
Status Display
*1
Free
In Use
*2
Line On Hold
*2
Incoming Call
*2
Recall
*3
<x> In Use
*3
<x> Line On Hold
*1 The following icons are also displayed if the corresponding feature is enabled.
Icon
46
OK
The line is idle.
Action: seize the line for dialing.
The line is on a call.
Action: none.
The line is on hold.
Action: retrieve the call on hold.
The line is receiving a call.
Action: answer the call.
The line is receiving a Hold Recall signal.
Action: answer the call.
A shared line is in use at another unit.
Action: join the call.
A shared line is on hold at another unit.
Action: retrieve the call on hold.
Call Forwarding
Do Not Disturb
OK
to perform an action on the line.
OK
OK
to perform an action on the line.
OK
Meaning
Meaning