Logging In For Configuration - Funkwerk bintec R1200 Manual

4 Access and configuration
104
User name Password
funkwerk Read and change system variables, store configurations; use
admin
write public
read public
It is only possible to change and save configurations if you log in with the user name ad-
min. Access information (user names and passwords) can also only be changed if you log
in with the user name admin. For security reasons, passwords are normally shown not in
plain text but only as asterisks. The user names, on the other hand, are displayed as plain
text.
The security concept of your device enables you to read all the other configuration settings
with the user name read, but not the access information. It is therefore impossible to log in
with read, read the password of the admin user and subsequently log in with admin and
make changes to the configuration.
Caution
All bintec devices are delivered with the same username and password. As long as
the password remains unchanged, they are therefore not protected against unauthor-
ized use. How to change the passwords is described in
Make sure you change the passwords to prevent unauthorized access to your device!
If you have forgotten your password, you must reset your device to the ex works state,
which means your configuration will be lost.

4.2.2 Logging in for Configuration

Set up a connection to the device. The access options are described in
page 98.
Funkwerk Configuration Interface
Log in via the HTML surface as follows:
(1) Enter your user name in the User field of the input window.
(2) Enter your password in the Password field of the input window and confirm with Re-
turn or click the Login button.
The status page of the Funkwerk Configuration Interface opens in the browser.
Funkwerk Enterprise Communications GmbH
Authorisations
Funkwerk Configuration Interface .
Read and write system variables (except passwords) (changes
are lost when you switch off your device).
Read system variables (except passwords).
Passwords on page 128.
Access Options
bintec R1xxx/R3xxx/R4xxx
on