Link Configuration Submenu - Funkwerk bintec R4100 User Manual

X.25
3

Link Configuration Submenu

The L C submenu is described below.
INK ONFIGURATION
R4100 Setup Tool
[X.25][LINK]: X.25 Link Configuration
Select link to configure
en1-0-llc (create new configuration)
en1-4-llc (create new configuration)
DELETE CONFIGURATION
➜
The X.25 L C
INK ONFIGURATION
port the X.25 protocol.
The list of available interfaces is a combination of hardware (modules installed)
and software interfaces.
■
Hardware interfaces (Ethernet, Serial, X.31)
Depending on which modules are installed, the system creates initial links
like enx-y-llc or six-y.
If your ISDN provider provides for X.31 services, an X.31 link is also
present. X.31 links have the format x31d-x-y-z with z = TEI.
■
Software interfaces (X.25 over ISDN, WAN partner, XOT)
Each X.25-compatible entry configured on the system will be displayed.
Configuration is carried out in X.25
This menu is used to configure the basic characteristics of the X.25 link.
Link Configuration Submenu
Funkwerk Enterprise Communications GmbH
EXIT
menu displays a list of all interfaces that sup-
➜ ➜
L C
INK ONFIGURATION
bintec User's Guide
3
MyGateway
EDIT.
13