Funkwerk bintec R1200 Manual page 254

9 Routing
240
Field
Default Route Distribu-
tion
Poisoned Reverse
RFC 2453 Variable
Timer
RFC 2091 Variable
Timer
Fields in the RIP Options Timer for RIP V2 (RFC 2453) menu
Funkwerk Enterprise Communications GmbH
Description
retained.
Select whether the default route of your device is to be propag-
ated via RIP updates.
The function is activated with Enabled.
The function is enabled by default.
Select the procedure for preventing routing loops.
With standard RIP, the routes learnt are propagated over all in-
terfaces with RIP SEND activated. With Poisoned Reverse ,
however, your device propagates over the interface over which
it learnt the routes, with the metric (Next Hop Count) 16
(="Network is not reachable").
The function is activated with Enabled.
The function is disabled by default.
For the timers described in RFC 2453, select whether the same
values that you can configure in the Timer for RIP V2 (RFC
2453) menu.
The function is activated with Enabled.
The function is enabled by default.
If you deactivate the function, the times defined in RFC are re-
tained for the timeouts.
For the timers described in RFC 2091, select whether the same
values that you can configure in the Timer for Triggered RIP
(RFC 2091) menu.
The function is activated with Enabled.
The function is disabled by default.
If the function is not activated, the times defined in RFC are re-
tained for the timeouts.
bintec R1xxx/R3xxx/R4xxx