Funkwerk bintec R1200 Manual page 335

Funkwerk Enterprise Communications GmbH
bintec R1xxx/R3xxx/R4xxx
Field
Incoming ISDN Number Only for Mode = Passive or Both.
Outgoing ISDN Number Only for Mode = Active or Both.
Transfer Own IP Ad-
dress over ISDN
Transfer Mode
Description
Enter the ISDN number from which the remote device calls the
local device (calling party number). Wildcards may also be
used.
Enter the ISDN number with which the local device calls the re-
mote device calls (called party number). Wildcards may also be
used.
Select whether the IP address of your own device is to be trans-
ferred over ISDN for IPSec callback.
The function is activated with Enabled.
The function is disabled by default.
Only if Transfer Own IP Address over ISDN = Enabled
Select the mode in which your device is to attempt to transfer its
IP address to the peer.
Possible values:
• Autodetect Best Mode : Your device automatically de-
termines the most favourable mode. It first tries all D channel
modes before switching to the B channel. (Costs are incurred
for using the B channel.)
• Autodetect only D Channel Modes : Your device auto-
matically determines the most favourable D channel mode.
The use of the B channel is excluded.
• Use specific D Channel Mode : Your device tries to
transfer the IP address in the mode set in the D Channel
Mode field.
• Try specific D Channel Mode, fall back to B
Channel : Your device tries to transfer the IP address in the
mode set in the D Channel Mode field. If this does not suc-
ceed, the IP address is transferred in the B channel. (This in-
curs costs.)
• Use only B Channel Mode : Your device transfers the IP
address in the B channel. This incurs costs.
11 VPN
321