Address List - Funkwerk bintec R1200 Manual

12 Firewall
382

12.3.1 Address list

In the Firewall -> Addresses -> Address List menu, a list of all configured addresses is
shown.
12.3.1.1 New
Choose the New button to set up new addresses.
Firewall Addresses
Fig. 152: ->
The Firewall -> Addresses -> Address List-> New menu consists of the following fields:
Fields in the Address List Basic Parameters menu
Field
Description
Address Type
Funkwerk Enterprise Communications GmbH
Address List New
-> ->
Description
Enter the desired description of the address.
Select the type of address you want to specify.
Possible values:
• Address / Subnet (default value): Enter an IP address
with subnet mask.
• Address Range: Enter an IP address range with a start and
end address.
bintec R1xxx/R3xxx/R4xxx