Funkwerk Enterprise Communications GmbH
bintec R1xxx/R3xxx/R4xxx
1.2 Cleaning
You can clean your device easily. Use a damp cloth or antistatic cloth. Do not use solvents.
Never use a dry cloth; the electrostatic charge could cause electronic faults. Make sure that
no moisture can enter the device and cause damage.
1.3 About this guide
This document is valid for bintec devices with system software as of software version
7.8.1.
The Reference, which you have in front of you, contains the following chapters:
User's Guide - Reference
Chapter
Quick Reference
Technical data
Access and configura-
tion
System management
Physical interfaces
LAN
Wireless LAN
Routing
WAN
VPN
Firewall
VoIP
Local services
Description
This contains instructions for how to set up and start up your
device and create a basic configuration.
This section contains a description of all the device's technical
properties.
This includes explanations about the different access and con-
figuration methods.
These chapters describe all configuration options of the Funk-
werk Configuration Interface. The individual menus are de-
scribed in the order of navigation.
The individual chapters also contain more detailed explanations
on the subsystem in question.
1 Introduction
5