Funkwerk bintec R1200 Manual page 149

Funkwerk Enterprise Communications GmbH
bintec R1xxx/R3xxx/R4xxx
Entering licence data
You can obtain the licence data for extra licences via the online licensing pages in the sup-
port section at www.funkwerk-ec.com
(Please also note the information on the licence card for licences at additional cost.) You
will then receive an e-mail containing the following data:
• License Key and
• Licence Serial Number
You enter this data in the System Management -> Global Settings-> System Licenses -
> New menu.
In the System Management -> Global Settings ->System Licenses menu, a list of all re-
gistered licenses is shown (Description, License Type, License Serial Number, Status).
Possible values for Status:
Licence
OK
Not OK
Not Supported
In addition, above the list is shown the System License-ID required for on-line licensing.
5.2.4.1 Edit/New
Choose the icon to edit existing entries. Choose the New button to add licences.
. Please follow the online licensing instructions.
Meaning
Subsystem is activated.
Subsystem is not activated.
You have entered a licence for a subsystem your device does
not support.
5 System management
135