Funkwerk bintec R1200 Manual page 271

Funkwerk Enterprise Communications GmbH
bintec R1xxx/R3xxx/R4xxx
Field
PPPoE Ethernet Inter-
face
PPPoE Interfaces for
Multilink
User name
Password
Always on
Description
tilink, you can connect several DSL connections from a pro-
vider over PPP as a static bundle in order to obtain more band-
width. Each of these DSL connections should use a separate
Ethernet connection for this. At the moment, many providers are
still in the process of preparing the PPPoE Multilink function.
For PPPoE Multilink, we recommend using your device's Ether-
net switch in Split-Port mode and to use a separate Ethernet in-
terface e.g. en1-1, en1-2 for each PPPoE connection.
If you also want to use an external modem for PPPoE Multilink,
you must run your device's Ethernet switch in Split-Port mode.
Only if PPPoE Mode= Standard
Select the Ethernet interface specified for a standard PPPoE
connection.
If you want to use an external DSL modem, select the Ethernet
port to which the modem is connected.
When using the internal DSL modem, select here the EthoA in-
terface configured in Physical Interfaces-> ATM-> Profiles->
New.
The default value is Not specified.
Only if PPPoE Mode= Multilink
Select the interfaces you want to use for your Internet connec-
tion. Click the Add button to create new entries.
Enter the user name.
Enter the password.
Select whether the interface should always be activated.
The function is activated with Enabled.
The function is disabled by default.
Only activate this option if you have Internet access with a flat-
rate charge.
10 WAN
257