Funkwerk bintec R1200 Manual page 365

Funkwerk Enterprise Communications GmbH
bintec R1xxx/R3xxx/R4xxx
Field
PPTP Mode
User Name
Password
Always on
Connection Idle Timeout
Remote PPTP IP Ad-
dress
Fields in the PPTP Tunnel IP Mode and Routes menu
Field
IP Address Mode
Description
The first character in this field must not be a number and no
special characters or umlauts must be used either.
Enter the role to be assigned to the PPTP interface.
Possible values:
• PNS (default value): this assigns the PPTP interface the role
of PPTP server.
• Windows Client Mode: this assigns the PPTP interface the
role of PPTP client.
Enter the user name.
Enter the password.
Select whether the interface should always be activated.
The function is activated with Enabled.
The function is disabled by default.
Only if Always up is disabled.
Enter the idle interval in seconds. This determines how many
seconds should pass between sending the last traffic data pack-
et and clearing the connection.
Possible values are 0 to 3600 (seconds). 0 deactivates the
timeout.
The default value is 300.
Example: 10 for FTP transmission, 20 for LAN-to-LAN transmis-
sion, 90 for Internet connections.
Enter the IP address of the PPTP partner.
Description
Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically.
Possible values:
11 VPN
351