Funkwerk bintec R1200 Manual page 475

Funkwerk Enterprise Communications GmbH
bintec R1xxx/R3xxx/R4xxx
Field
Authentication Password You must enter the administrator password for the access point,
Last Write Result
Description
point.
otherwise you cannot carry out the configuration operation.
The value of this field can only be read.
Displays the result of the last configuration operation.
Possible values:
• No Error: The access point reported a successful operation
or a configuration change has not yet been made with OK.
• No Response: The access point has not responded.
• Access Denied: The access point reported an authorisation
error. Check the authentication password.
• Invalid IP Parameters: There is a problem with the in-
tended IP parameters (IP address, netmask, or gateway ad-
dress).
• Destination Unreachable: The access point cannot be
reached for internal reasons (e.g. the interface to which the
access point is connected is down). A configuration request
cannot be sent to the access point.
• Other AP Error: The access point responds to the config-
uration request with an unexpected or non-specific error.
• Internal Error: An internal device problem prevented the
configuration option from being carried out.
14 Local services
461