Funkwerk bintec R1200 Manual page 228

8 Wireless LAN
214
Field
Fields in the WDS Security Settings menu
Field
Privacy
Transmit Key
WEP Key 1 - 4
Funkwerk Enterprise Communications GmbH
Description
the interface is automatically used.
If the option is not activated, you can enter a suitable name in
the input field.
The Use Standard option is enabled by default.
Description
Select whether an encryption method is to be used for this WDS
link and if so, which one.
Possible values:
• None (default value): Data traffic on this WDS link is not en-
crypted.
• WEP40: Data traffic on this WDS link is encrypted with
WEP40. In WEP Key 1 - 4, enter the key for this WDS link
and in Transmission Key , select the default key.
• WEP104: Data traffic on this WDS link is encrypted with
WEP104. In WEP Key 1 - 4, enter the key for this WDS link
and in Transmission Key , select the default key.
Only if Privacy = WEP40
, WEP104
Select one of the keys configured in WEP Key <1 - 4> as the
default key.
The default value is Key 1.
Only if Privacy = WEP40, WEP104
Enter the WEP key. There are two ways of entering a WEP key:
• Direct entry in hexadecimal form
If the entry starts with 0x, the generator is deactivated. Enter
a hexadecimal string with exactly the right number of charac-
ters for the selected WEP mode. 10 characters for WEP40 or
26 characters for WEP104 e.g. WEP40: 0xA0B23574C5,
WEP104: 0x81DC9BDB52D04DC20036DBD831
• Direct entry of ASCII characters
bintec R1xxx/R3xxx/R4xxx