Funkwerk bintec R1200 Manual page 224

8 Wireless LAN
210
Field
WMM
Fields in the Virtual Service Sets Security Settings menu
Field
Security Mode
Transmit Key
WEP Key 1-4
Funkwerk Enterprise Communications GmbH
Description
are quicker and clients with an enabled power save function are
not addressed.
The function is activated by choosing Enabled.
The function is disabled by default.
Make sure that ARP processing cannot be applied in conjunc-
tion with the MAC bridge function.
Select whether voice or video prioritisation via WMM (Wireless
Multimedia) is to be activated for the wireless network so that
optimum transmission quality is always achieved for time-critical
applications. Data prioritisation is supported in accordance with
DSCP (Differentiated Services Code Point) or IEEE802.1d.
The function is activated by choosing Enabled.
The function is enabled by default.
Description
Select the security mode (encryption and authentication) for the
wireless network.
Possible values:
• Inactive (default value): Neither encryption nor authentica-
tion
• WEP 40: WEP 40 Bit
• WEP 104: WEP 104 Bit
• WPA-PSK: WPA Preshared Key
• WPA-Enterprise: 802.11i/TKIP
Only if Security Mode = WEP 40, WEP 104
Select one of the keys configured in WEP Key <1 - 4> as the
default key.
The default value is Key 1.
Only if Security Mode = WEP 40 , WEP 104
bintec R1xxx/R3xxx/R4xxx