Funkwerk bintec R1200 Manual page 405

Funkwerk Enterprise Communications GmbH
bintec R1xxx/R3xxx/R4xxx
VoIP Application Level Gateway
Fig. 157: ->
The VoIP->Application Level Gateway -> SIP Endpoints-> Edit/New menu, consists of
the following fields:
Fields in the SIP Endpoints Basic Parameters menu
Field
Type of Endpoint
Protocol
Internal IP Address
Remote Port
Internal Port
SIP Endpoints
->
Description
Select the SIP terminal to be used.
Possible values: Client (default value): internal terminals (e.g.
telephones) are used. Server: a server is used so that termin-
als can register from outside.
Select the protocol to be used for data transmission.
Possible values: UDP (default value) or TCP .
If a protocol has been automatically recognised, it should not be
changed.
Enter the internal IP address of the terminal.
Only for Type of Endpoint = Client.
Enter the remote port.
Only for Type of Endpoint = Server.
Enter the internal port.
Edit/New
->
13 VoIP
391