Funkwerk bintec R1200 Manual page 232

8 Wireless LAN
218
Field
WPA2 Cipher
8.1.4.2 Client Link Scan
After the desired Client Links have been configured, the
You use this icon to open the Scan menu.
Wireless LAN WLAN1
Fig. 96: ->
After successful scanning, a selection of potential scan partners is displayed in the scan
list. In the Action column, click [Select] to connect the local clients with this client. If the
partners are connected with one another, the
The icon appears in the Connected column if the connection is active.
The Wireless LAN -> WLAN1 -> Client Link -> Scan menu consists of the following fields:
Funkwerk Enterprise Communications GmbH
Description
Only for Security Mode = WPA-PSK and WPA Mode = WPA2
Select which encryption method should be used.
Possible values:
• TKIP (default value): Temporal Key Integrity Protocol.
• AES: Advanced Encryption Standard.
• AES and TKIP
Both encryption methods are rated as secure, with AES offering
better performance.
Client Link Scan
-> ->
icon appears in the Connected column.
icon is shown in the list.
bintec R1xxx/R3xxx/R4xxx