Funkwerk bintec R1200 Manual page 372

11 VPN
358
11.4.1.1 New
Choose the New button to set up new GRE tunnels.
VPN GRE GRE Tunnels
Fig. 141: -> ->
The VPN -> GRE -> GRE Tunnels menu consists of the following fields:
Fields in the GRE Tunnels Basic Parameters menu
Field
Description
Local GRE IP Address
Remote GRE IP Ad-
dress
Default Route
Funkwerk Enterprise Communications GmbH
Description
Enter a description for the GRE tunnel.
Enter the source IP address of the GRE packets to the GRE
partner.
If no IP address is given (this corresponds to IP address
0.0.0.0), the source IP address of the GRE packets is selected
automatically from one of the addresses of the interface via
which the GRE partner is reached.
Specify the destination IP address of the host or network to
which the packets are to be sent through the GRE tunnel.
If you enable the Default Route, all data is automatically routed
to a connection.
The function is disabled by default.
bintec R1xxx/R3xxx/R4xxx