Funkwerk bintec R1200 Manual page 150

5 System management
136
System Management
Fig. 67:
Activating extra licences
You activate extra licences by adding the received licence information in the System Man-
agement -> Global Settings -> System Licenses -> New menu.
The System Management -> Global Settings -> System Licences -> New menu con-
sists of the following fields:
Fields in the System Licences Basic Parameters menu
Field
Licence Serial Number
Licence Key
Note
If Not OK is displayed as the status:
• Enter the licence data again.
• Check your hardware serial number.
If Not Supported is displayed as the status, you have entered a license for a sub-
system that your device does not support. This means you cannot use the functions of
this licence.
Funkwerk Enterprise Communications GmbH
Global Settings System Licenses
-> ->
Value
Enter the licence serial number you received when you bought
the licence.
Enter the licence key you received by e-mail.
New
->
bintec R1xxx/R3xxx/R4xxx