Funkwerk bintec R1200 Manual page 215

Funkwerk Enterprise Communications GmbH
bintec R1xxx/R3xxx/R4xxx
Field
RTS Threshold
Short Retry Limit
Long Retry Limit
Fragmentation
Threshold
ED Threshold
Description
The default value is 2.
Here, you select how the RTS/CTS mechanism is to be
switched on/off.
If you choose User Defined, in the input field you can specify
the data packet length threshold in bytes (1..2346) as of which
the RTS/CTS mechanism is to be used. This makes sense if
several clients that are not in each other's wireless range are
run in one access point. The mechanism can also be switched
on/off independently of the data packet length by selecting the
value Always on or Always off (default value).
Enter the maximum number of attempts to send a frame of
length less than or equal to the value defined in RTS
Threshold. After this many failed attempts, the packet is dis-
carded.
Possible values are 1 to 255.
The default value is 7.
Enter the maximum number of attempts to send a data packet
of length less than or equal to the value defined in RTS
Threshold. After this many failed attempts, the packet is dis-
carded.
Possible values are 1 to 255.
The default value is 4.
Enter the maximum size as of which the data packets are to be
fragmented (i.e. split into smaller units). A low value is recom-
mended for this field in areas with poor reception and in the
event of radio interference.
Possible values are 256 to 2346.
The default value is 2346 bytes.
Define the Energy Detection threshold for CCA (Clear Channel
Assessment).
Possible values are -2147483648 to 2147483647.
8 Wireless LAN
201