Funkwerk bintec R1200 Manual page 69

Funkwerk Enterprise Communications GmbH
bintec R1xxx/R3xxx/R4xxx
Pin
8
The combined serial Ethernet 10/100Base-T interface does not have an Auto-MDI-X func-
tion.
3.4.5.2 ADSL interface
The ADSL interface is connected via an RJ45 plug. The cable supplied connects the RJ45
plug needed for the device to an RJ45 plug provided for Annex A. The second cable sup-
plied connected the RJ45 plug with an RJ45 plug for Annex B.
The following pins are used for the ADSL connection:
Fig. 28: ADSL interface (RJ45 socket)
The pin assignment for the ADSL interface (RJ45 socket) is as follows:
RJ45 socket for ADSL connection
Pin
1
2
3
4
5
6
7
8
3.4.5.3 ISDN So interface
bintec R3000 has two additional ISDN-So interfaces, which can be used for back-up func-
tions, for example.
The connection is made via an RJ45 socket:
Function
TX (console)
Function
Not used
Not used
Not used
Line a
Line b
Not used
Not used
Not used
3 Technical data
55