Chapter 2 Quick Reference; Introduction; System Requirements; Presettings - Funkwerk bintec R1200 Manual

2 Quick Reference
8

Chapter 2 Quick Reference

This chapter explains how you set up and start up your device and how you create a basic
configuration using the Funkwerk Configuration Interface .

2.1 Introduction

You configure your device using the Funkwerk Configuration Interface .
The way to obtain the basic configuration is explained below step-by-step. Detailed know-
ledge of networks is not necessary. A detailed online help system gives you extra support.
The Companion CD also supplied includes all the tools that you need for the configuration
and management of your device.
The BRICKware contains useful applications for managing your device.

2.2 System requirements

Your bintec gateway contains extensive features for encrypted data transfer and Internet
access for both individual users and companies.
For configuration of the device, your PC must meet the following system requirements:
• Microsoft Windows operating system Windows 2000 or higher
• Internet Explorer 6 or 7, Mozilla Firefox Version 1.2 or higher
• Installed network card (Ethernet)
• CD ROM drive
• Installed TCP/IP protocol
• High colour display (more than 256 colours) for correct representation of the graphics

2.3 Presettings

Preconfigured settings
Your device is shipped with a pre-defined IP configuration:
• IP Address: 192.168.0.254
Funkwerk Enterprise Communications GmbH
bintec R1xxx/R3xxx/R4xxx