Funkwerk bintec R1200 Manual page 289

Funkwerk Enterprise Communications GmbH
bintec R1xxx/R3xxx/R4xxx
Field
Fields in the Advanced Settings Options for On-demand Bandwidth menu
Field
Channel Bundling
Description
quested to do so by the connection partner.
• Windows Server Mode : Your device calls back after a
period of time proposed by the Microsoft client (NT: 10
seconds, new systems: 12 seconds. It uses the subscriber
number (Entries-> Number (MSN)) with the Mode Outgo-
ing or Both that has been entered for the other party. If no
number is entered, the required number can be reported by
the caller in a PPP negotiation. This setting should be
avoided where possible for security reasons. Currently can-
not be avoided for the connection of mobile Microsoft clients
via DCN.
• Delayed, CLID only : Your device calls back after ap-
prox. four seconds if your device is requested to do so by
the connection partner. Only makes sense for CLID.
• Windows Server Mode, Callback optional : Like
Windows Server Mode but with the option of aborting.
This setting should be avoided for security reasons. The Mi-
crosoft client also has the option of aborting callback and
maintaining the initial connection to your device without call-
back. This only applies if no fixed, outgoing number has
been configured for the connection partner. This is done by
pressing CANCEL to close the dialog box that appears.
Description
Select whether channel bundling is to be used for ISDN connec-
tions with the connection partner, and if so, what type.
Your device supports dynamic and static channel bundling for
dialup connections. Only one B channel is initially opened when
a connection is set up. Dynamic channel bundling means that
your device connects other ISDN B channels to increase the
throughput for connections if this is required, e.g. for large data
rates. If the amount of data traffic drops, the additional B chan-
nels are closed again. In static channel bundling, you specify
right from the start how many B channels your device is to use,
regardless of the transferred data rate.
Possible values:
• None (default value): No channel bundling, only one B chan-
10 WAN
275