Funkwerk bintec R1200 Manual page 223

Funkwerk Enterprise Communications GmbH
bintec R1xxx/R3xxx/R4xxx
Wireless LAN WLAN1
Fig. 93: ->
The Wireless LAN -> WLAN1 -> Virtual Service Sets (VSS) ->
the following fields:
Fields in the Virtual Service Sets Service Set Parameters menu
Field
Network Name (SSID)
Intra-cell Repeating
ARP Processing
Virtual Service Sets
->
Description
Enter the name of the wireless network (SSID).
Enter an ASCII string with a maximum of 32 characters.
Also select whether the Network Name (SSID) is to be trans-
mitted.
The function is activated by choosing Visible.
The function is enabled by default.
Select whether communication between the WLAN clients is to
be permitted within a radio cell.
The function is activated by choosing Enabled.
The function is enabled by default.
Select whether the ARP processing function should be enabled.
The ARP data traffic is reduced in the network by the fact that
ARP broadcasts that have been converted to ARP unicasts are
forwarded to IP addresses that are known internally. Unicasts
8 Wireless LAN
/New
->
/New menu consists of
209