Funkwerk bintec R1200 Manual page 490

16 External Reporting
476
Field
Facility
Timestamp
Protocol
Type of Messages
Funkwerk Enterprise Communications GmbH
Description
• Information (default value)
• Debug (lowest priority)
Syslog messages are only sent to the host if they have a higher
or identical priority to that indicated, i.e. all messages generated
are recorded at syslog level Debug.
Enter the syslog facility on the host.
This is only required if the Log Host is a Unix computer.
Possible values: local0 - 7
.
The default value is local0.
Select the format of the time stamp in the syslog.
Possible values:
• None (default value): No system time indicated.
• Time : System time without date.
• Date & Time : System time with date.
Select the protocol for the transfer of syslog messages. Note
that the syslog server must support the protocol.
Possible values:
• UDP (default value)
• TCP
Select the message type.
Possible values:
• System & Accounting (default value)
• System
• Accounting
bintec R1xxx/R3xxx/R4xxx