Funkwerk bintec R1200 Manual page 319

Funkwerk Enterprise Communications GmbH
bintec R1xxx/R3xxx/R4xxx
Field
Proxy ARP Mode
Description
Networks reachable over this interface are, however, included
when calculating the routing information and propagated over
active interfaces.
• Active: OSPF is not activated for this interface, i.e. OSPF
protocol packets sent over this interface.
• Down : OSPF is disabled for this interface.
Select whether and how ARP requests are to be responded to
for the specified connection partner.
Possible values:
• Inactive (default value): Deactivates Proxy ARP for this
connection partner.
• Active or Idle: Your device only responds to an ARP re-
quest if the status of the connection to the connection partner
is Up or Dormant. In the case of Idle, your device only re-
sponds to the ARP request; the connection is not set up until
someone actually wants to use the route.
• Active Only: Your device responds to an ARP request only
if the status of the connection to the connection partner is Up
(active), i.e. a connection already exists to the connection
partner.
10 WAN
305