Funkwerk bintec R1200 Manual page 130

4 Access and configuration
116
System management
Menu
State
Global Settings
Interface Mode / Bridge
Groups
Administrative Access In this menu, you configure the access options for the individual
Remote Authentication In this menu, you configure the authentication via a RADIUS
Physical interfaces
Menu
AUX
Ethernet Ports
ISDN Ports
ADSL Modem
Funkwerk Enterprise Communications GmbH
Function
In this menu, general information on your device is displayed at
a glance.
This information includes serial number, software version, cur-
rent memory and processor use, status of the physical inter-
faces and the last 10 system messages.
In this menu, you enter the basic system settings of your device,
such as, for example, system name, system date, system time
and passwords.
You can also manage licences that are necessary for the use of
certain functions.
In this menu, you define the mode in which the interfaces of
your device are to run (routing or bridging) and if necessary can
define bridge groups.
interfaces.
server or TACAS+ server.
Function
You can define various settings for communication between the
gateway and modem in this menu.
In this menu, you configure the Ethernet interfaces of your
device. To do this, you select the speed and type of interface,
for example.
In this menu, you configure the ISDN interface of your device.
Here you enter data such as the type of ISDN connection to
which your device is connected.
Only R3000 and R3000w.
In this menu, you configure the ADSL interface of your device.
Here you specify whether Annex A or Annex B is used as ADSL
bintec R1xxx/R3xxx/R4xxx