Funkwerk bintec R1200 Manual page 171

Funkwerk Enterprise Communications GmbH
bintec R1xxx/R3xxx/R4xxx
Physical Interfaces
Fig. 77:
The Physical Interfaces -> AUX -> AUX menu consists of the following fields:
Fields in the AUX Basic Parameters menu
Field
AUX Port Status
Line Speed
AUX AUX
-> ->
Description
Select whether the AUX port should be enabled or disabled.
The port is enabled by choosing Enabled. The port is disabled
by default.
Here you select the speed at which the gateway addresses the
modem (in bps).
Possible values:
• Default: The Baud rate of the serial terminal connection is
retained. (9600 in ex works state)
All other values mean that the modem is addressed at the cor-
responding speed in bps.
• 9600 bps
• 19200 bps
• 38400 bps
• 57600 bps (default value): Recommended for communica-
tion with a GSM modem.
6 Physical interfaces
157