Funkwerk bintec R1200 Manual page 307

Funkwerk Enterprise Communications GmbH
bintec R1xxx/R3xxx/R4xxx
Field
DHCP MAC Address
DHCP Hostname
Fields in the Settings for Routed Protocols over ATM menu (only shown for Type =
Routed Protocols over ATM)
Field
IP Address/Netmask
Prioritize TCP ACK
Packets
Fields in the PPP over ATM Settings menu (only shown for Type = PPP over ATM),
see also
Description
connection, e.g. 00:a0:f9:06:bf:03. An entry is only re-
quired in special cases.
For Internet connections, it is sufficient to select the Use Pre-
configured option (default setting), in which case the MAC ad-
dress of en1-0 is used.
Only if Address Mode = DHCP
Enter the MAC address of the internal router interface of ATM
connection, e.g. 00:e1:f9:06:bf:03.
If your provider has assigned you an MAC address for DHCP,
enter this here.
You can select the Use Pre-configured option (default setting),
in which case the MAC address of en1-0 is used.
Only if Address Mode = DHCP
If necessary, enter the host name registered with the provider to
be used by your device for DHCP requests.
The maximum length of the entry is 45 characters.
Description
Enter the IP addresses (IP Address) and the corresponding
netmasks (Netmask) of the ATM interface. Add new entries
with Add.
Select whether the TCP download is to be optimised in the
event of intensive TCP upload. This function can be specially
applied for asymmetrical bandwidths (ADSL).
The function is activated with Enabled.
The function is disabled by default.
10 WAN
293