Funkwerk bintec R1200 Manual page 246

Hide thumbs Also See for bintec R1200:

Table of Contents

Corresponding NAT

entry for outgoing con-

External IP address

Remote network

Funkwerk Enterprise Communications GmbH

Specify whether a NAT entry is to be created for outgoing con-

nections for portforwarding.

The function is activated with Enabled.

The function is activated by default.

Select the external host or network IP address of the selected

In default scenarios, only one external IP address is available.

In this case, select the Auto option.

The Auto option is disabled by default, so that you can enter

the IP address manually.

Only if Service = User-defined.

First select whether all connections are to be permitted, or

whether a certain port or port range is to be defined.

Possible values:

• All (default value): No port mapping is carried out. In this

case, the value -1 is entered in the input fields.

• Specify Port : Enables a port number to be entered.

• Specify Port Range : Enables a port number range to be

Now enter the original destination port or destination port range

(...to...) of the incoming IP connection.

Select whether IP packets are to be forwarded to a remote net-

The function is disabled by default.

bintec R1xxx/R3xxx/R4xxx

Show Quick Links

Table of Contents