Funkwerk bintec R1200 Manual page 444

14 Local services
430
Field
Pool Usage
The Advanced Settings menu consists of the following fields:
Fields in the Advanced Settings menu
Field
Gateway
Lease Time
DHCP Options
Funkwerk Enterprise Communications GmbH
Description
the IP address pool.
Specify whether the IP pool is used for DHCP requests in the
same subnet or for DHCP requests that have been forwarded to
your device from another subnet. In this case it is possible to
define IP addresses from another network.
Possible values:
• Local (default value): The DHCP pool is only used for DHCP
requests in the same subnet.
• Local/Relay: The DHCP pool is used for DHCP requests in
the same subnet and from other subnets.
• Relay: The DHCP pool is only used for DHCP requests for-
warded from other subnets.
Description
Select which IP address is to be transferred to the DHCP client
as gateway.
Possible values:
• Use router as gateway: The IP address defined for the
Interface is transferred.
• No gateway (default value): No IP address is sent.
• Specify: Enter the corresponding IP address.
Enter the length of time (in minutes) for which an address from
the pool is to be assigned to a host.
After the Lease Time (Minutes) expires, the address can be re-
assigned by the server.
The default value is 120.
Specify thwhich additional data is forwarded to the DHCP client.
Possible values for Option:
• Time Server (default value): Enter the IP address of the
bintec R1xxx/R3xxx/R4xxx