Funkwerk bintec R1200 Manual page 185

Funkwerk Enterprise Communications GmbH
bintec R1xxx/R3xxx/R4xxx
Note
If no entry is specified (ex works state), every incoming ISDN call is accepted by the
ISDN Login service. To avoid this, you should make the necessary entries here. As
soon as an entry exists, the incoming calls not assigned to any entry are forwarded to
the CAPI service.
In the Physical Interfaces -> ISDN Ports -> MSN Configuration menu a list of all MSNs
is shown.
6.3.2.1 New
Choose the New button to edit MSNs.
Physical Interfaces
Fig. 81:
The Physical Interfaces -> ISDN Ports-> MSN Configuration-> New menu consists of
the following fields:
Fields in the MSN Configuration Basic Parameters menu
Field
ISDN Port
Service
ISDN Ports MSN Configuration
-> ->
Description
Select the ISDN port for which the MSN is to be configured.
Select the service to which a call is to be assigned on the MSN
below.
6 Physical interfaces
New
->
171