Chapter 5: Configuration
Teklogix Imagers
5.14
Teklogix Imagers
The Teklogix Imagers applet is used to create, modify, delete, and activate imager settings.
The principle uses of the applet are to decode bar codes and to capture images. A PTSI
Imager demo applet is also provided to illustrate how the imager works.
Refer to Appendix D: "Teklogix Imagers Applet" for configuration details.
To launch this applet:
•
In the Control Panel, choose the Teklogix Imagers icon.
Note: This icon is only displayed when the appropriate imager is installed in your 7545.
160
Psion Teklogix 7545 Hand-Held Computer User Manual
Preliminary Draft 3