Appendix D: Teklogix Imagers Applet
Removing a Custom Preset
The parameter list is displayed; the new value for the changed parameter is shown.
•
Tap on OK to exit to the preset list and save the changes.
D.3.7
Removing a Custom Preset
•
Highlight the custom preset you want to delete, and tap on the Remove button.
A window is displayed warning you that you are about to remove a preset.
•
Tap on Yes to remove the preset or No to cancel the operation.
D.4
Configuring the Bar Code Decoding Camera Presets
To configure the bar code decoding camera presets:
•
Tap on Start>Settings>Control Panel>Teklogix Imagers.
•
Tap on the Barcoding tab.
Figure D.2 Bar Code Presets
This window lists all the presets, both predefined and the custom. Presets are identified
as follows:
•
Predefined presets are marked as read-only. For a description, review "Predefined Pre-
sets" on page D-2.
•
Predefined presets are marked as 'R' read-only.
D-8
Psion Teklogix NEO Hand-Held Computer User Manual