Summit Client Utility (Scu) For Model Ra2041; Assigning The Ip Address - Psion Teklogix WORKABOUT PRO 7527 C G2 User Manual

Chapter 2: Basic Checkout

Summit Client Utility (SCU) For Model RA2041

2.4.1 Summit Client Utility (SCU) For Model RA2041

This section describes the Summit Client Utility (SCU). The SCU provides the
utilities you will need to configure the Summit 802.11b/g Compact Flash radio
module, model number RA2041 so that it can communicate through a wireless LAN
effectively and securely.

2.4.2 Assigning The IP Address

Before launching the SCU, you need to configure how the IP address will be
obtained. If your network is not using a DHCP server, you will need to assign an
IP address.
1. Tap on Start>Settings>Network and Dial-up Connections. (If the
Start Menu isn't displayed in the taskbar, press [FN/BLUE] [0] to
display it.)
If you're using the keyboard, press [FN/BLUE] [0] to display the Start
Menu. Use the [DOWN] arrow key to highlight Settings. Press the
[RIGHT] arrow key to display the sub-menu. Highlight Network, and press
[ENTER].
2. Choose the Summit WLAN Adapter icon to open the 802.11b/g Wire-
less LAN Settings window. In Figure 2.1, this icon is labelled
SDCCF10G1.
14 WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual
Figure 2.1 Summit WLAN Adapter Icon