Table of Contents
Advertisement
ACCEPTABLE TYPES OF ORIGINALS
Make sure your originals are completely dry before setting them in the machine.
Originals containing wet ink or correcting fluid will mark the exposure glass and
resulting image will be affected.
Acceptable Original Sizes
Where original is
set
Exposure glass
Document Feeder
(ADF)
Originals Unsuitable for the Document Feeder (ADF)
Do not set the following types of originals in the Document Feeder (ADF) be-
cause they may be damaged. Place them on the exposure glass instead.
• Originals of sizes other than those specified in the previous table
• Originals containing staples or clips
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermosensitive paper, art paper,
aluminum foil, carbon paper, or conductive paper
• Originals with indexes, tags, or other projecting parts
• Sticky originals such as translucent paper
• Thin and soft originals
• Originals of inappropriate weight (see table above)
• Originals in bound form, such as books
• Transparent originals such as OHP transparencies or translucent paper
Acceptable origi-
nal size
Maximum A3 (297
× 420 mm), 11" × 17"
(279 × 432 mm)
Fax transmission:
A5 L to A3 L (up
to 1,200mm long) 8"
× 5
" L to 11" ×
1
/
2
47" (DLT) L
ACCEPTABLE TYPES OF ORIGINALS
Maximum number
of sheets
1
50
Paper thickness
----
2
40 - 128 g/m
(10 -
34lb in inch version)
1
13
Advertisement
Table of Contents
