Specifying Original Sizes - Ricoh SP 5200S Operating Instructions Manual

1. Press [Original Settng].
2. Select [SADF], and then press [OK].
3. Place one page of an original, and then press the [Start] key.
4. When the machine instructs you to place another original, place the next page.
The second and subsequent pages will be fed automatically without pressing the [Start] key.
• When [Batch] is displayed instead of [SADF], specify the SADF mode under Switch to Batch in
User Tools. For details about Switch to Batch, see "Input / Output".
• When the Sort, Combine or 1 Sided
originals have been scanned.
• In SADF mode, an original must be set within a specified time after the previous original has been
fed. You can adjust this time under SADF Auto Reset in User Tools. For details, see "Input /
Output".
• You cannot switch between 1-sided and 2-sided originals during copying.
• p.195 "Input / Output"

Specifying Original Sizes

Specify the size of the originals.
The size of originals can be specified by the following three methods:
• Using the paper tray settings
When [Use Paper Tray Settg] is selected, the machine scans the originals based on the size of the
paper loaded in the selected tray.
• Selecting regular sizes
The user selects the size of the originals from the regular sizes.
• Specifying custom sizes
2 Sided function has been set, press the [ ] key after all
Placing Originals
1
27