Conference - Yealink SIP VP-T49G User Manual

You can use the SIP VP-T49G IP phone to create a conference using the phone's local
conference and network conference. During a conference, you can manage each
participant. You can mute, hold and remove individual participants in the video call
screen. For more information on the video call screen, refer to
on page 32.
Note
Network conference is not available on all servers. For more information, contact your
system administrator.
You can create up to three-party video conference call and five-way mixture audio and
video conference. The mixture audio and video conference supports five parties
participated (including yourself) at the same time including a maximum of three video
calls.
The following figure shows what the touch screen looks like in a mixture conference call
with three video calls and two audio-only calls:
To set up a local conference call:
1. Place a call to the first party.
2. When the first party answers the call, tap the Conference soft key to place a new
call.
The active call is placed on hold.
3. Enter the number of the second party, and then press
soft key.
4. When the second party answers the call, tap the Conference soft key on the
Basic Phone Features
Video Call Screen Display
or tap the Conference
193