Headset Use - Yealink SIP VP-T49G User Manual

User Guide for SIP VP-T49G IP phone
The touch screen prompts the following warning:
6. Tap OK to confirm the deletion or Cancel to cancel.
If you want to use a wired headset, physically connect your headset and activate the
headset mode for use. For more information on physically connecting a headset, refer
to Phone Installation
If you want to use a wireless headset, activate the Bluetooth mode and then pair and
connect the Bluetooth headset with your phone. For more information on using a
Bluetooth headset, refer to
This section provides an introduction to wired headset use.
Note
There are three types of headset for SIP VP-T49 IP phones: the wired headset, EHS
headset and Bluetooth headset. You can connect up to three types of headset at once.
if you press the HEADSET key, the IP phone will use the headset according to the
And
priority: Bluetooth headset >EHS headset >wired headset.
To activate the headset mode:
1. Press
The HEADSET key LED illuminates solid green, and the icon
status bar of the touch screen when the headset mode is activated. When you tap
the line key or the Answer soft key to answer an incoming call, the call is connected
to your headset automatically. For more information on using the headset to answer
106
on page 25.
Bluetooth Headset
on the phone.
on page 108.
appears on the