User Guide for SIP VP-T49G IP phone
4.
Enter the PPPoE user name and password in the corresponding fields.
5.
Tap the Save soft key to accept the change or
Note
Wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters,
contact your system administrator.
Yealink SIP VP-T49G IP phone supports Wi-Fi feature. You can connect your phone to a
wireless network.
Three ways to connect SIP VP-T49G IP phone to the wireless network:
Manually connect to an available wireless network
Wi-Fi Protected Setup (WPS)
Manually add a wireless network
When the phone is connected to a wireless network, the Wi-Fi icon
the status bar of the touch screen.
You can manually connect your phone to a wireless network.
To manually connect to an available wireless network via phone user interface:
1.
Tap
->Basic->Wi-Fi.
2.
Tap On from the radio box of Wi-Fi.
44
to cancel.
will display on