Yealink SIP VP-T49G User Manual page 216

User Guide for SIP VP-T49G IP phone
3. Enter the desired pickup code in the Directed Call Pickup Code field.
4. Click Confirm to accept the change.
You can use the BLF key in the following ways:
Place a call to the monitored user.

Transfer a call to the monitored user.

Pick up an incoming call of the monitored user.

You can tap a BLF key to dial out the monitored phone number when the monitored line
is idle.
To place a call to the monitored user when the IP phone is idle:
1. Press the BLF key.
The IP phone dials out the phone number of the monitored user.
When there is already an active call on the IP phone, you can transfer the active call to
the monitored user by tapping the BLF key. The phone handles the active call differently
depending on the transfer mode on DSS key (refer to
Key). The transfer mode on DSS key has the following modes:
Blind Transfer

216
Configuring Transfer Mode on DSS