touch screen of the monitoring phone to display the caller ID when the monitored line
receives an incoming call.
To enable visual and audio alert features via web user interface:
1.
Click on Features->Call Pickup.
2.
Select Enabled from the pull-down list of Visual Alert for BLF Pickup.
3.
Select Enabled from the pull-down list of Audio Alert for BLF Pickup.
4.
Click Confirm to accept the change.
Note
Visual and audio alert features are configurable via web user interface only.
When the monitored line receives an incoming call, the following occurs on your phone:
The phone plays a warning tone (if enabled).
The BLF key icon flashes red.
The caller ID appears on the touch screen (if enabled).
In the following figure, the touch screen shows an incoming call from 1058 on the
monitored line.
Advanced Phone Features
213