Yealink SIP VP-T49G User Manual page 41

The phone status is displayed on the first page of the web user interface.
Note
If IP mode of the phone is
the browser's address bar to view the phone status.
servers. Contact your system administrator for more information.
If your phone cannot contact a DHCP server for any reason, you need to configure
network settings manually. The IP phone can support either or both IPv4 and IPv6
addresses.
To configure the IP address mode via phone user interface:
1. Tap ->Advanced (default password: admin) ->Network->WAN Port.
2. Tap the IP Mode field.
configured as IPv4 & IPv6, you can enter either of them in
Getting Started
IPv6 is not available on all
41