Yealink SIP VP-T49G User Manual page 150

User Guide for SIP VP-T49G IP phone
Enter the desired number using the keypad or the onscreen keyboard.
Press
With the optional headset connected, press
-
Enter the desired number using the keypad or the onscreen keyboard.
Press
Note
To permanently use the headset mode, refer to
The SIP VP-T49G IP phone can handle multiple calls at a time. However, only one active
call (the call that has audio associated with it) can be in progress at any time. The SIP
VP-T49G IP phone can handle a maximum of 50 calls at one time.
To place multiple calls:
You can have more than one call on your SIP VP-T49G IP phone. To place a new call
during an active call, do one of the following:
- Tap the line key. The active call is placed on hold.
Enter the desired number using the keypad or the onscreen keyboard.
Press
- Press
Tap the NewCall soft key.
Enter the desired number using the keypad or the onscreen keyboard.
Press
You can tap the desired call, and then tap the Resume soft key to retrieve it.
Note If multiple accounts are registered on the phone, you can first tap the desired line key in
the idle screen or tap the desired line from the status bar in dialing screen, and then you
can use the selected account to place a call.
You can only place audio-only call if your administrator has disabled video feature on
your phone. Contact your system administrator for more information.
150
or tap Send.
or tap Send.
or tap Send.
or tap the Hold soft key to place the original call on hold.
or tap Send.
to activate the headset mode.
Headset Prior on page 107.