Yealink SIP VP-T49G User Manual page 121

The contacts in the mobile phone will display in the Mobile Contacts list.
Note If the mobile phone disconnects from the IP phone while the IP phone is loading the
mobile contacts, the touch screen will prompt
and the mobile contacts directory will not appear at the IP phone directory list.
The icon will appear next to the device name that the Bluetooth-enabled mobile
phone you are connecting or have connected.
When you make a mobile phone call by using your SIP VP-T49G IP phone, the IP phone
acts as a hands free device for your mobile phone. The call is made through your
mobile phone, but the audio is present on and the call control is done by using the SIP
VP-T49G IP phone. You can have both mobile phone call and IP phone call on your SIP
VP-T49G IP phone, and two type of call will not affect each other.
To make a call through a mobile phone:
1. Tap the My Mobile line key.
2. Enter the desired number using the keypad.
3. Tap Call from Mobile.
The outgoing call will appear on both your IP phone and your mobile phone display.
After the call is picked up, the audio goes through the SIP VP-T49G IP phone,
although the mobile phone display also shows a connected call. You can hold,
mute or end the call on the SIP VP-T49G IP phone, and after you hold the call you
can resume the call or place a new call.
Note You can control the call's audio to go through the mobile phone or SIP VP-T49G IP
phone on your mobile phone.
The phone will first match the contacts in the Mobile Contacts directory to present
the caller/callee identity when receiving/placing a mobile phone call.
Customizing Your Phone
Fail to download mobile contacts!‖,
―
121