Yealink SIP VP-T49G User Manual page 49

Once WPS setup has completed successfully, the touch screen will prompt
―Connect Success.‖.
Note Contact your gateway/router provider for more information.
If your gateway/router has SSID broadcast disabled, it might not appear in the scanning
results. In that case, you must manually add a wireless network.
To add a wireless network:
1. Tap ->Basic->Wi-Fi.
2. Tap On from the radio box of Wi-Fi.
3. Tap Add.
4. Tap the Security Mode field.
5. Tap the desired value in the pop-up dialog box.
- If you select None or WEP:
1) Enter the desired profile name in the Profile Name field.
2) Enter the desired value in the SSID field.
3) Enter the desired password in the WPA Shared Key field.
- If you select WPA PSK or WPA2 PSK:
1) Enter the desired profile name in the Profile Name field.
2) Enter the desired value in the SSID field.
3) Tap the Cipher Type field.
4) Tap the desired Cipher type (TKIP , AES or TKIP+AES) in the pop-up dialog
box.
5) Enter the desired password in the WPA Shared Key field.
Getting Started
49