Yealink SIP VP-T49G User Manual page 226

User Guide for SIP VP-T49G IP phone
The phone prompts ―Delete this video?‖
4. Tap OK to accept the change or Cancel to cancel.
You can delete the desired recorded audio-only files in the same way as video
files.
You can record calls by tapping a record key on the phone. The SIP VP-T49G IP phone
supports record and URL record.
Two ways of call recording:
Record: The phone sends a SIP INFO message containing a specific header ―Record:

on/off‖ to trigger a recording.
URL Record: The phone sends an HTTP URL request to trigger a recording. Contact

your system administrator for the predefined URL.
Note
If you record a call using a USB flash drive, the recorded file will
flash drive. For more information, refer to
USB Flash Drive
Before recording any call, especially those involving PSTN, it is necessary to know about
the rules and restrictions of any governing call-recording in the place you are in. It is also
very important to have the consent of the person you are calling before recording the
conversation.
Call record is not available on all servers. Contact your system administrator for more
information.
To configure a record key via phone user interface:
1. Tap ->Features->DSS Keys.
226
on page 220.
be stored in the USB
Call and Conference Recording Using a