Yealink SIP VP-T49G User Manual page 43

To configure a static IPv6 address via phone user interface:
1. Tap ->Advanced (default password: admin) ->Network->WAN Port->IPv6.
2. Tap the Type field.
3. Tap Static IP in the pop-up dialog box.
4. Enter the desired values in the IP, IPv6 IP Prefix, Gateway, Primary DNS and
Secondary DNS fields respectively.
5. Tap the Save soft key to accept the change or
If you are using an xDSL modem for IPv4 network connection, you can connect your
phone to the Internet via PPPoE mode. Set the WAN port as a PPPoE port. The PPPoE port
will perform a PPP negotiation to obtain the IP address. Contact your system
administrator for the PPPoE user name and password.
To configure PPPoE via phone user interface:
1. Tap ->Advanced (default password: admin) ->Network->WAN Port->IPv4.
2. Tap the Type field.
3. Tap PPPoE in the pop-up dialog box.
Getting Started
to cancel.
43