Yealink SIP VP-T49G User Manual page 129

Usage: Tap the forward key to forward an incoming call to the number specified in the
Value field.
Note
If the Value field is left blank, the forward key performs the same as the FWD soft key
when receiving an incoming call.
Transfer
When there is an active call on the phone, you can use this key feature to handle the call
differently depending on the transfer mode assigned to the DSS key.
Dependencies:
Usage:
When the transfer mode on DSS key is Blind Transfer, tap the transfer key to

complete the blind transfer to the number specified in the Value field.
When the transfer mode on DSS key is Attended Transfer, tap the transfer key

to dial out the number specified in the Value field, and then perform the
attended or semi-attended transfer.
When the transfer mode on DSS key is New Call, tap the transfer key to place

a new call to the number specified in the Value field.
Note
Transfer mode via DSS key is configurable via web user interface at the path
Features->Transfer->Transfer Mode via Dsskey.
If the Value field is left blank, the transfer key performs the same as the TRANSFER key or
the Transfer soft key during a call. For more information, refer to
190.
Hold
You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies:
Usage:
1. Tap the hold key during an active call to place the call on hold.
2. Tap the hold key again to retrieve the held call.
Label (key label displayed on the touch screen)
Value (the number you want to forward to)
Type (Key Event)
Key Type (Transfer)
Label (key label displayed on the touch screen)
Value (the number you want to transfer to)
Type (Key Event)
Key Type (Hold)
Label (key label displayed on the touch screen)
Customizing Your Phone
Call Transfer on page
129