Yealink SIP VP-T49G User Manual page 38

User Guide for SIP VP-T49G IP phone
Instead of using the onscreen keyboard, you can use the keypad on your phone to enter
number or dial when the phone is on the pre-dialing screen.
To use phone keypad:
1. Pick up the handset, press the Speakerphone key or tap the line key.
2. Do one of the following:
If you want to
Enter only digits (1), uppercase
(A) characters, lowercase (a)
characters, or alphanumeric
(2aB) characters.
Enter special characters.
38
Press a keypad key one or more times
(depending what input mode you're in) to
enter the characters that is displayed on the
keypad key.
You can tap the IME soft key one or more times
to switch between uppercase (ABC soft key),
numeric (123 soft key), alphanumeric (2aB soft
key) and lowercase (abc soft key) input
modes.
For example, if the input mode is ABC:
To enter ―A‖, press
-
To enter ―B‖, press
-
To enter ―C‖, press
-
Press the keypad key

For key:
If it is the uppercase (ABC soft key) or
lowercase (abc soft key) input mode, it
will provide the space character.
If it is the numeric (123 soft key) or
alphanumeric (2aB soft key) input mode, it
will only provide the digit 0.
For key: it only provides the pound
character (#).
For key: it only provides the asterisk
character (*).
Tap the IME soft key one or more times to

set the input mode to *#@.
Tap the character(s) you want to enter.
Action
once.
twice quickly.
three times quickly.
, or .