Yealink SIP VP-T49G User Manual page 249

receives a new voice mail or the user re-registers the account that has unread voice
mail(s).
Note
Voice Mail is not available on all servers and differs from different servers. You can
configure the phone not to display the pop-up prompt, contact your system administrator
for more information.
The icon on the status bar has a counter indicating the number of messages you
haven't heard yet.
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to
answer the call. Follow the voice prompt from the system server to leave a voice mail,
and then hang up.
To configure voice mail access codes via phone user interface:
1. Tap ->Message->Set Voice Mail.
2. Enter the voice mail access code (e.g., *88) in the desired account field.
3. Tap the Save soft key to accept the change or
Note
Voice mail access codes must be predefined on the system server. Contact your system
administrator for the more information.
To listen to voice mails:
1. When the touch screen prompts that the phone receives a new voice mail, press
or tap Connect to dial out the voice mail access code.
2. Follow the voice prompt to listen to your voice mails.
Note
Before listening to voice mails, ensure that the voice mail access code has been
configured.
Advanced Phone Features
to cancel.
249